Complete Filtration Services is a full service provider of filter products and equipment. We provide a wide range of filter products to the Residential Commercial and Industrial marketplace.

PLEASE CONTACT US IF YOU DO NOT SEE WHAT YOU NEED, OR IF YOU WOULD LIKE THE ITEMS ON OUR SITE IN DIFFERENT QUANTITES THAN THE ONES LISTED. ITEMS ARE CONSTANTLY BEING ADDED SO ADDITIONAL IMAGES MAY NOT BE SHOWN BUT ARE AVAILABLE UPON REQUEST. THANKS FOR SHOPPING WITH US!!!!

DOW FilmtecTW30-4040 4' dia. x 40' long-2200 gpd # 80610

DOW FilmtecTW30-4040 4' dia. x 40' long-2200 gpd # 80610
Item# newitem123196416
$285.00

Product Description

Complete Filtration Services is proud to sell this

NSF Listed Reverse Osmosis Membrane

PART # Dow Filmtec Part # 80610

TW30-4040

4' dia. x 40' long-2200 gpd



Dow Filmtec TW30-4040 Commercial Reverse Osmosis Membranes: The Dow Filmtec TW30-4040 reverse osmosis membrane is the industry standard for reliable operation and production of the highest quality water. The Dow TW30-4040 RO membrane features the thickest feed spacer (34 mil) to lessen the impact of fouling. The TW30-4040 membrane element may be cleaned over the widest pH range (pH 1-13) for the most effective cleaning. The Dow Filmtec TW30-4040 reverse osmosis membrane is a tape wrapped RO membrane element. Tape-wrapped elements are built with the same high quality membranes and materials of construction as industrial elements, except for the hard outershell, and are more economical for commercial systems with one or two elements per housing. Dow Filmtec Part # 80610 Dow Filmtec TW30-4040 Commercial Reverse Osmosis Membrane Specs: Dimensions: 3.9" W X 40" L Maximum Operating Temperature: 113°F (45°C) TW30-4040 Permeate Flow Rate gpd (m3/d): 2400 gpd (9.1) (Permeate flow rates for individual elements may vary +/-20%.) Maximum Operating Pressure: 600 psig (41 bar) Maximum Feed Flow Rate: 14 gpm (3.2 m3/hr) Maximum Pressure Drop: 13 psig (0.9 bar) Stabilized Salt Rejection: 99.5% Maximum Feed Silt Density Index (SDI): 5 Free Chlorine Tolerance: <0.1 ppm pH Range, Continuous Operation: 2-11 (Maximum temperature for continuous operation above pH 10 is 95°F (35°C)) pH Range, Short Term Cleaning (30 min.): 1-13 Dow Filmtec TW30-4040 Reverse Osmosis Membrane Materials of Construction: Membrane Type: Polyamide Thin-Film Composite Dow Filmtec Commercial TW30-4040 Reverse Osmosis Systems: The Dow Filmtec TW30-4040 Reverse Osmosis Membrane can be used in many brands of Commercial Reverse Osmosis Water Filtration Systems. Dow Filmtec TW30-4040 Reverse Osmosis Membrane Instructions: After installation of the Filmtec TW30-4040, the first full tank of permeate should be discarded. Do not use this initial permeate. Proper start-up of reverse osmosis water treatment system is essential to prepare the TW30-4040 industrial membrane elements for operating service and to prevent membrane damage due to overfeeding or hydraulic shock. Keep the TW30-4040 RO element moist at all times after initial wetting. During prolonged system shutdowns, it is recommended that the Filmtec Dow TW30-4040 membrane elements be immersed in a preservative solution. This is to prevent biological growth. Avoid any abrupt pressure or cross-flow variations on the spiral elements during shutdown, cleaning or other sequences to prevent possible TW30-4040 Reverse Osmosis Membrane damage. During start-up, a gradual change from a standstill to operating state is recommended: - Feed pressure should be increased gradually over a 30-60 second time frame - Cross-flow velocity at set operating point should be achieved gradually over 15-20 seconds - Permeate obtained from first hour of operation should be discarded. Maximum pressure drop across an entire pressure vessel (housing) is 30 psi (2.1 bar).



Product Name Nominal Active Surface Area ft2 (m2) Permeate Flow Rate gpd (m3/d) Stabilized Salt Rejection (%) FILMTEC TW30-4040 78 (7.2) 2400 (9.1) 99.5 1. Permeate flow and salt rejection based on the following test conditions: 2000 ppm NaCl, 225 psi (15.5 bar), 77°F (25°C), 15% recovery. 2. Permeate flows for individual elements may vary +/-20%. 3. For the purpose of improvement, specifications may be updated periodically.





PLEASE CALL OR EMAIL US

WITH ANY QUESTIONS!!

COMPLETE FILTRATION SERVICES INC.

425 MIll Street

Greenville NC 27858

252-752-3340 Office

sales@cfsco.net

$.99 SHIPPING ONLY INCLUDES ORDERS WITHIN THE CONTINENTAL UNITED STATES. SHIPPING IS AVAILABLE FOR HAWAII AND CANADA SECURED ONLINE ORDERING!!!